JET-LUBE SILICONE COMPOUND DM is a premium silicone compound for use in a wide variety of applications. Its low volatility, non-melting thickener and high dielectric strength make it the compound of choice for moisture proofing ignition systems, spark plug connections, electrical assemblies, cable and battery terminals and other similar applications.

BENEFITS:
  • Has no dropping point
  • Excellent work stability under high loads
  • Highly water resistant
  • High strength fluid film
  • Silicone emulsion
  • Pumpable formula
  • Direct Comparison to Dow Corning® 111
  • Dielectric strength-500volts
  • Valve lubricant
  • Temkin Load – 65 Lbs.
  • Water Resistant
  • Nontoxic

Silicone Compound DM™

Moisture Proofing Sealant & Lubricant

Silicone Compound DM

Description

SILICONE COMPOUND DM is a dielectric, translucent paste that provides excellent lubrication and sealing properties for plug and gate valves, stuffing boxes, o-rings, vacuum and pressure systems. The low volatility and inert properties allow it to be used on a wide range of elastomers and plastics. It is not recommended for use on surfaces to be painted.

 

Certifications

 

Mil Spec

MIL C-21567A (DM-2)

 

MIL S-8660C (DM-3)

 

NATO #S-736

 

NSF Registered H-1
Reg. #132225

Applications

Ideally suited as an insulator for electrical connectors against the elements. Thyrotrophic gel acts as a water proofing agent and O-ring lubricant for instrumentation boxes, motor covers, air intakes, and vacuum systems.

 

Use to protect ignition systems, spark plug connections, electrical assemblies, cable and battery terminals from moisture.

 

Not recommended for surfaces to be painted.

 

Code #
Size
Service Rating
SDS
TDS
Get Assistance
73560
73550
73505
73506
73516
73524
73529
5-oz tube
14 oz cartridge
1 lb can
5 lb can
5 gal pail
15 gal drum
50 gal drum
-70°F to 400°F
-57°C to 204°C
acrobat
acrobat
Email for Assistance