JET-LUBE MARINE GRADE ANTI-SEIZE is a Nonmetallic blend of anti-friction materials specially formulated for marine or offshore environments.

BENEFITS:
  • No metallic components
  • Highly water resistant
  • Extreme temperature >2600°F (1427°C)
  • Not considered a marine pollutant
  • Suited for high humidity offshore environments
  • Extreme pressure
  • Bushability to -65°F (-54°C)
  • Organic formula
  • High film strength
  • Nonconductive
  • No VOC

Marine Grade Anti-Seize

Non-Metallic Moly Paste

Marine Grade Anti-Seize

Description

Replaces conventional metallic anti-seize, having marine pollutant restrictions. This non-metallic formula allows this product to be shipped offshore and around the world to replace items containing copper. Ideally suited for offshore and marine environments where high humidity and salt water affect the performance of the anti-seize. Suited for applications where high nickel alloys, zinc coated fasteners, and can be used to protect metal surfaces from corrosion related to exposure to the elements.

 

Applications

For nut and bolt assemblies: apply the anti-seize to the starting threads of the bolt, allowing the material to travel down the threads with the nut. Then apply on the surface between the nut and flange to allow the product to eliminate metal to metal contact. This will build a shield between the two metal surfaces.

 

Recommended for the following:

• Boiler covers
• Release paste for raised face gaskets
• Heat exchanger bolts
• Door track lubricant for sliding doors
• Centrifugal pump shaft lubricant
• Bolt lubricant for engine assembly
• Anything needing lubricated for threaded fasteners

 

Certifications


NSF Registered

MIL-PRF-907E

 

Code #
Size
Service Rating
SDS
TDS
Get Assistance
49702
49704
1/2 lb brush top
1 lb brush top
-54°C to 1427°C
-65°F to 2600°F
acrobat acrobat

Email for Assitance