Ezy-Pak™ Extreme & Ezy-Pak™ Extreme FA
Low "E" Injectable Valve Stem Packing / Fibered Low “E” Injectable Valve Stem Packing

Ideal for petrochemical, refining and pipeline valve maintenance needs, EZY-PAK EXTREME and EZY-PAK EXTREME FA (Fiber Added) are enhanced low "E" (low emission) formulated packings using a balance of molybdenum disulfide and surface modified synthetic graphite, plus carbon fibers with EZY-PAK EXTREME FA. This unique combination provides lubrication and enhanced seal energizing properties for a wide variety of temperatures and pressures. Its composition allows the needed flow characteristic into valve stuffing boxes using high pressure injectable guns. EZY-PAK EXTREME and EZY-PAK EXTREME FA assure protection against rust, oxidation, and corrosion, and it will not harden, evaporate, or dry out.

These packings are specially formulated for D&T (Drill & Tap) programs to assist and seal packing materials where fugitive emissions concerns are present. This formulation enhances the performance of braded, die formed or chevron type packing materials. It will help seal once the packing material has failed, leaked or exceeded guaranteed life cycle. EZY-PAK EXTREME and EZY-PAK EXTREME FA's blend of components helps pack off against back flow of gases and caustic liquids.

- No reportable VOC's
- Industries' first low "e" injectable (The requirement to comply with low emission standards
has become one of the most important issues with regard to valves over the past several years.)

Benefits

  • Low "E" formulation
  • No reportable VOC’s
  • Rust, oxidation & corrosion protection
  • Will not harden, evaporate or dry out
  • Easily pumpable
  • Wide temperature range
  • No shelf life concerns
  • Not restricted for air freight shipments
  • Well suited for steel, aluminum, stainless steel, cast iron, titanium, copper, brass, alloys, plastic
  • Suitable for water valves
  • PATENT PENDING

Specifications

  • Base Materials
    • Complex & Inorganic / Synthetic PAO & Ester
  • Friction /
    Nut-Factor
    • (Coefficient of Friction) EZY-PAK EXTREME - 35 ksi 0.12
    • (Coefficient of Friction) EZY-PAK EXTREME - 80 ksi 0.125
    • (Coefficient of Friction) EZY-PAK EXTREME FA - 35 ksi 0.11
    • (Coefficient of Friction) EZY-PAK EXTREME FA - 35 ksi 0.121
  • Service Rating
    • -40° F to 750°F
    • -40°C to 399°C

Product Numbers

United States

  • 88981 - Stick (Type J) in Cartridge 10/case
  • 88983 - Stick (Type G) in Jar 6/case
  • (FA) 88281 - Stick (Type J) in Cartridge 10/case

United Kingdom

  • JA88981 - Stick (Type J) in Cartridge 10/case
  • JA88983 - Stick (Type G) in Jar 6/case
  • (FA) JA88281 - Stick (Type J) in Cartridge 10/case

Canada

  • 88981CA - Stick (Type J) in Cartridge 10/case
  • 88983CA - Stick (Type G) in Jar 6/case
  • (FA) 88281CA - Stick (Type J) in Cartridge 10/case

WATCH OUR ON DEMAND WEBINAR HERE


*Certified Low-Leaking Valves” shall mean valves for which a manufacturer has issued either: (i) a written guarantee that the valve will not leak above 100 parts per million (ppm) for five years; or (ii) a written guarantee, certification or equivalent documentation that the valve has been tested pursuant to generally-accepted good engineering practices and has been found to be leaking at no greater than 100 ppm.