JET-LUBE EZY-PAK #115, our most popular packing compound, is designed to be used as a valve stem packing, pump shaft packing or to seal any rotating shaft that has a packing gland to seal off back pressure.

BENEFITS:
  • Color: Green
  • Stick Formula
  • Nontoxic
  • Specific Gravity: 1.38
  • Flash Point >500°F (260°C)
  • PTFE, Polymers & Mineral Oils
  • Corrosion Resistant
  • Synthetic Blend
  • No Dropping Point
  • Valve packing
  • Pump Packing

EZY-Pak™ #115

Packing Compound For Use in Expanding Type Gate Valves
Ezy Pak 115

Description

Formulated from synthetic fluid and fibers plus inert fillers and a high percentage of ground PTFE particles for performance over a wide temperature range. EZY-PAK #115 is ideal for preventing leaks while lowering the torque required to operate the valve.

 

Applications

EZY-PAK #115 can be pumped using a high pressure lubricator, or may be formed by hand into any void requiring a packing compound.

 

Excellent for use with hydrocarbons, aqueous solutions, brine, dilute acids, dilute alkalis, water and steam.

 

EZY-PAK #115 is an injectable packing that can be pumped into the stem gland of expanding gate valves through ball check fittings on the body or bonnet. EZY-PAK #115 can also be shaped by hand and pressed into any area requiring leak-free seal or packing.

 

Not recommended for oxygen service.

 
Code #
Size
Service Rating
SDS
TDS
Get Assistance
98581
98582		 J-Stick
K-Stick		 -80°F to 550°F
-62°C to 288°C 		MSDS - Material Safety Data
 MSDS - Material Safety Data Email for Assitance