JET-LUBE JLS - OILFIELD Tool Joint Compound is a high quality product containing premium grade copper flake, amorphous graphite, rust and corrosion inhibitors, and other inorganic solids. All are blended in JET-LUBE’s unique grease compounded from custom refined, low-sulfur oil to ensure brushability over a wide temperature range, tenacious adherence to all surfaces, resistance to water washout, and prevention of rust/corrosion.

BENEFITS:
  • Lead and zinc free
  • Premium grade copper
  • Rust and corrosion inhibited formula
  • Sticks to wet joints
  • Conforms to the API RP7G make-up charts
  • High temp complex grease base
  • High dropping point >450°f
  • Friction factor 1.0

JLS® - Oilfield (Jet-Lube Special)

Tool Joint Compound

JLS Oilfield

Description

JLS is a result of laboratory and field development efforts spanning several decades. It is manufactured under the industry’s toughest quality control regimen and is especially designed to prevent thread and shoulder wear, and to provide superior performance on the rig floor and downhole in medium duty drilling just as KOPR-KOTE® and JET-LUBE 21® perform in more severe conditions. For invert muds or high-pH muds, a special base grease is available.

 

Applications

JLS is recommended for use on tool joints in drilling medium
depths and formations. It provides consistent control of make-
up and break-out in these conditions and protects against gall- ing and seizure. JLS prevents excessive stresses which shorten tool joint life, and the metallic solids of JLS form a gasket on threads and shoulders that prevent metal-to-metal contact under high torque loads.

 

Not recommended for oxygen service.

 

Code #
Size
Service Rating
SDS
TDS
Get Assistance
11823
11812
11815
11824
11829
1 gal pail
2 1/2 gal pail
5 gal pail
15 gal drum
50 gal drum
0°F to 450°F
-18°C to 232°C
acrobat
acrobat
Email for Assitance

 

Also available in a Water Well grade.